Thanks for the reply.
Sorry, I should have been more specific. What I meant is the closing behaviour when I click outside. I need the Popover to stay open when doing so. The sap.m.MessagePopover does that. Is there any way to realize that?
Best regards,
Matthias
Hi Zoltan
This parameter is not for the FF LOG report that the question is for. It only publishes the request number for provisioning FF id/User (Enable CUP request no to be shown in Firefighter - Firefighter ID/Role assignment screen).
We are looking into a custom report as the request is for the Compliance team.
Regards
Sarada
There is a "license check" app which you can run on your production ADS server that will "check" for you. Basically, I believe if you include an user interaction at all, it is considered an "interactive" form....ie, you are NOT just sending it to static PDF display or a print spool.
Hi,
It is possible to upgrade tp version alone without a kernel upgrade. The below procedure may help you.
Regards,
Ganesan
Hi Shardul,
Can you provide the full logs with the error messages?
Regards, Mike
SAP Technology RIG
Hi Gabriel,
There is no enhancement applied in EXIT_SAPLKAEP_001.
Best Regards
Hi Abhishek,
If I understand your issue correctly then this seems to be a cut-over issue. What I can suggest is that:
1. Close all outstanding orders that are account assigned to the CAPEX Internal orders.
2. Based on the Finance decision, AuCs are to be scraped or capitalized and then scraped.
3. Create / upload Projects and their WBS elements in the system.
4. Create AuCs for WBS elements (as per Investment profile settings).
5. Create all orders (PR / PO / GR / IR / Service order) with the same amount and stage of processing, and with account assignment to WBS elements.
6. Settle the WBS elements to respective AuC.
Hope this helps.
Best regards,
Aditya
Hi Saad,
I don't think this is possible since they use the same table and object, maybe you can try to get the event of the choosefromlist and open the assets screen manually
Hi Ravikumar,
->When we trying to add a Preview button on TI screen, we are getting the error which is attached below and those screens are created for Desktop and Tablet . even we are getting the same kind of error while we trying to Attchement EC to our custom screen
1.Preview model dialogue and Attachment EC reuse components can be used only for desktop device type.
FYI: Please check 9.6.2 Mobile Solutions in SAP Cloud Applications Studio SDK Documentation.
(Just to be sure, please raise this issue as another question so that other experts can help you)
2. In the meanwhile, create screens for desktop only and test.
Best Regards,
Fred
Hi guys
I have got a team who wants me to build a dashboard for them.
They have a list of KPIs they want to see in their dashboard and also wants the detailed data in a tabular form as a second layer to the dashboard.
Now with my rather limited experience with building dashboards, I am not able to decide which tool shall I use?
The data for the KPIs will come from varied sources mostly form excel sheets and some from the universe?
I just need some starting point for the dashboard development.
Could you guys help?
cheers
Venky,
I would create two new DI connections - one for the HR data and one for the HR failed data. For additional security, you could also add a HR DI project. All of these can then be secured with new HR groups (which you will need to create as sub-groups under existing DI groups).
As you would put the failures into a separate DB schema, you would have to talk to your DBAs about how that is encrypted/ accessed in the DB layer to prevent access. You could look at VPD in Oracle if that's your DB technology, but would then need to give an exemption to the HR user that is used for the failed data repository connection.
regards
Adrian
Hi Saurabh,
The example that you provide supported me to read BP hierarchy information.
Now my question question is: how can i create or delete parent account relationships?
thanks in advance,
Kind regards,
Andres
Hi Ritesh,
The change log for CJ40 Unit cost planning screen that we can see is the standard SAP functionality. As you can see in Table CKHS for Unit costing header data, the table line item has created by/on and change by/on details which is also displayed in the CJ40 Unit costing dialog.
If the complete log of details for CJ40 Unit cost planning changes is required, then you might need to create a Z-table that should be filled by enhancement spot of CJ40 (I believe this to be ES_SAPLKKDI) whenever any changes are done in Unit costing sheet.
Hope this helps.
Best regards,
Aditya
You should read documentation on Time Evaluation to learn, such as those mentioned by Woody, those in the Time Eval. Wiki (HCM Time Management - ERP Human Capital Management - SCN Wiki) and those available though help.sap.com
Also do a Time Evaluation Test, with the "Display log" box checked, for one employee and for a period of a few days, and drill down into that log to see how Time Entries are read and processed.
Hi Vamshee,
Check the below link. See if you have made the necessary configuration.
http://scn.sap.com/community/erp/sd/billing/blog/2012/03/29/rebate-process-configuration
Regards,
Ram
Your point is quite valid. These days, the term "cloud" has devolved to the point where it means nearly anything. To answer your question, think of it this way:
A SaaS solution is a *shared* software application. While the customers of a SaaS solution have separate data sets (often called "tenants") and, to a minor degree, some separate configuration of how the application runs, the users of a SaaS solution share the same codebase. The SaaS vendor is responsible for maintenance of the codebase, and therefore determines when the codebase is upgraded.
A hosted solution, on the other hand, is still a *private* software application. The application's codebase as well as the configuration and the data is used only by its owner. While the vendor still provides upgrades & patches, the owner is responsible for applying them. In the traditional definition of hosting (which has been used for decades) it differs from an on-site/on-premise application only in that the hardware is being managed offsite by a third party.
The benefits of SaaS over private/hosted are the economies of scale, and that the vendor publishes the software updates; all you have to do is work around them (e.g. work around downtimes, conduct testing).
The benefits of private/hosting over SaaS largely boil down to adaptability (customization) and control. You generally have a much greater ability to modify/adapt the software when you are running a private application. Private software also tends to address concerns about data security, but it's a matter of debate as to whether this is reality or just perception.
As a final note, SaaS is not synonymous with "cloud" as there are other types of cloud applications besides SaaS. There are also IaaS and PaaS solutions. In IaaS, the infrastructure is shared through virtualization but the software running in that shared infrastructure is still private. With PaaS, a shared software *platform* is provided, on which private applications are developed.
Hope this helps.
Hi,
Can you please check the Configuration tab for Selected fields.
Thanks
Deepak
Hi Experts,
For invoicing purpose many vendors are connecting us through AS2. Now we have developed an AS2
for a new vendor but while testing they are getting '503 server not available' error from our test system
when our network team can trace the incoming traffic and as per them our PO server returning timed
out error. I have also asked one of our existing vendor to send a file to our Test landscape but they
are having same issue though I can find a successful connection from this vendor one week back.
Could you please let me know how can I trace the error and how AS2 works i.e. is there any way we can
check with AS2 url
Regards,
Anir
Hi Rachana,
Please set this parameter in the 'advanced mode' section of the receiver channel.
Parameter Name : retain.attachment.name
Parameter value : true
arjun
Hi,
We created a replication task in HANA, connecting to remote source in other HANA system. the procedure has been called and the data replication happened fine.
I am testing real time changes getting updated to target table in HANA, it is not working, no changes are replicated in the target system. I am not sure, what is the issue,
one thing observed is, DP remote subscription monitor displaying error in Changed Data Capture(CDC), could not find much on this error.
Is this error causing the problem of not replicating data? Please assist on this request.
We are on SAP HANA 1.0 SP 10,