Thanks for your immediate reply Vaibhav...
Srikanth
↧
Re: Embargo check in three different levels
↧
Re: Text 001000037800010 ID B03 language EN not found
It works
↧
Re: Lot origin 10 / Physical sample
Hi Kumar Sir,
Please help me correct my understanding here. I think the point d) I mentioned last time in the discussion part for your DOC, may be having some impact here in this case. When I try to open the inspection type 10 (having inspection lot origin 10) in my system, I couldn't find out 'Physical Sample Type' active for it as shown below -
But, if I open any other inspection type, (Ex, 89, 01, etc) I see this is active as you can see form the below screenshot -
So, I think this point needs to be checked and confirmed if it's working.
Thanks,
Arijit
↧
Re: One Invoice is Booked & Posted but...
Yes Lokesh, I checked and found this error.
↧
Regarding partical invoice
If we have two down payment one is cleared and other one is not cleared if we want to create a partial invoice for cleared down payment then will system allow us or not??
Thanks in Advance
sandeep
↧
↧
Re: BAPI_ALM_ORDER_MAINTAIN with multiple components creating duplicate entries
Nice,
That's what I was asking about operation.
Regards
Ashish
↧
Re: ODN for FR and ES
Hello Sridevi
We also have similar requirement in our project. Can you please let me know how did you handle this functionality for FR and ES?
Thanks
Amrish
↧
Re: SRM POWL Action buttons are not working in SAP Portal 7.4
Hi Ramesh,
This issue usually occurs, when the domain and/or protocol is different for portal and for ABAP request of the POWL. Please refer to the following KBA for more information: https://launchpad.support.sap.com/#/notes/2279800.
Best Regards,
Daniel Marlen
↧
Re: Configuration error on Adapter-Framework(AFW)-Server error
Also attaching the error screenshot here.
↧
↧
Re: Vizframe Bullet Vertical - get interval ValueAxis
Hi Juan,
Ok, I got your point. But it seems that there is at least no official way to retrieve this information. However, I think you don´t really need this information from VizFrame. You could check for the highest value in your data model (Json or oData?), round it and then add a meaningful value to it. I don´t see a problem doing it like this.
Best regards,
Sebastian
↧
Re: SAP LT System Requirement?
Dear Mariel,
ad 1.) SAP Landscape Transformation 2.0 requires to be installed on a Solution Manager, as it relies on several Solution Manager features, such as Workcenters, Roadmap and Documentation capabilities.
You may configure the SAP LT in a way that the pure execution of the data transfer is taking place on a seperate host in order to seperate workload and/or optimize performance, but the so called control system has to be a SAP Solution Manager instance.
ad 2.) I am not sure if this question relates to SAP LT or to SAP LT Replication Server (aka 'SLT'), which is a different product for permanent data replication. In both cases the DMIS add-on contains a server and a client software part. Ideally, you would distribute the same DMIS SP version in order to benefit from all available features of a given release. Especially with SLT there are some product features, such as archive delete filtering for example, which require identical SP levels.
However, there are certain ranges of compatibility, so that in general SAP can guarantee that basic data transfer capabilities always works even between different SP versions.
As a rule of thumb, at least a 2 SP level difference should always be compatible in regards to the data transfer capabilities. This is, what we always regression test.
Older versions may work, too, but we do not test this intensively. In case that there are features, which do not work, then, we need to recommend you to update the SP level accordingly.
Best regards,
Roland Hamm,
Product Management DM<, SAP SE
↧
Integration of SuccessFactors Todo-List to portal UWL with SAP PI
We have the requirement to show all SuccessFactors Todo-Items also in the SAP Portal Unified Worklist.
I know, there is the ODATA webservice enitity "Todo", that returns all Todos for the currently logged in user.
To use this, we need to use OAUTH2 for login.
As far as I figured out it is possible to create connectors to collect data from different systems to the UWL - I guess, this could work.
But, in our current architecture actually all interfaces are routed over SAP PI. The Portal is actually not allowed to access the SuccessFactors over the internet.
All our interfaces in SAP PI are using the SFSF-Adapter - which works great.
Unfortunately, you can only use User and Password in the SFSF-ODATA Adapter and there is no option to pass a SAML token.
This means I can only use a "technical interface user", instead of the currently logged in User.
Any ideas or workarounds would be helpful,
Regards,
Heiko
↧
Re: Mass data modification
Hi,
The Sales Quote Migration works only for quote initial load, and not update. The options for your mass data update use case are A2X service, Odata or report. I'd suggest you contact SAP service center for a solution.
Regards,
Suresh.
↧
↧
Re: Project item number not specified in a requirement
Hi Jyoti,
Thanks for your reply, I have deleted the SCHED_LINE field value
I set Field TARGET_QTY in table ORDER_ITEMS_IN to 10.000,000
now TARGET_QTY = REQ_QTY but i still get that message AG 005.
If i delete REQ_QTY , SO is incomplete.
Thanks,
Alin
↧
Re: The sum of component quantity of BOM should not be greater than header BOM Qty
Hi
you want to Restrict Mov (261-531 >101) Or Just Warning messaage?
↧
Customer Exit Formula Variable using Replacement Path Formula Variable
Hi All
I have a requirement where in I have to create a Fomula variable (F1) using replacment path and this variable contains the Key value of the characteristic it is based on.
Now, I want to this formual (F1) in anoter Formula Variable(F2) which is of the type Customer Exit, as I need to use the Value of F1 to do some back end logic in the customer exit which is not possible using Bex Formula's.
Now I understand that Customer exit variables are called only during I_STEP , but the value for my F1 gets filled post the I_STEPS. How can I use the vlaue for the F1 in the F2 customer exit?
Regards,
Manpreet
↧
Re: SP Transaction notification on field in item master data
Hi Matt,
If your issue are resolved so kindly closed the thread with mark the correct or helpful answer.
Thanks,
Kamlesh Naware
↧
↧
ECT (quality system) refresh made several changes to configuration: RFC destination,objects links, cFolders links,alias for web server etc.
Dear Experts,
We did our Quality system refresh and we observed that a of configuration changes have been done automatically, this includes RFC destination changes to production , object links destination change, cFolders links pointing to production, change in logical system for financial & capacity planning etc.
I have few doubts on it.
1. What are the changes that system makes after quality refresh apart from those I mentioned above ?
2. Where I can see that path (configuration path)?
3. Why system changes them automatically? Is there a way to track those changes and after every quality refresh we can run a job or a program to reset them?
Kindly provide your suggestions.
Best Regards
Saurabh
↧
Re: Component - a toolbar with buttons
Hi,
I´m sorry that I don´t have a solution for this issue. However, as an alternative maybe this rough solution would fit better:
1. Create a UI5 library
2. Create a custom control within this library (your toolbar)
3. Import the library via bootsrap in index.html or via sap.ui.getCore().loadLibary()
Maybe the following thread is interesting for you: https://scn.sap.com/thread/3502503
This way you shouldn´t have problems to handle events as it is like normal event handling for other controls.
Best regards,
Sebastian
↧
Why there aren't many record in 0FI_AR_4
Hi everyone,
i check the extractor 0FI_AR_4 in ERP Production system with the setting:
Request ID: Test
Data records: 999999
Display Extr.Call: 9999
Update mode: F
but there are only 40.000 records. i think there is something wrong here because our system has hundred of accounting post everyday, and we used the System more nearly one year.
Do you know what i did wrong here?
Thanks
↧
More Pages to Explore .....